Installation method of air curtain bottom plate/back plate:
Such as installation on a concrete wall. According to the position of the holes on the installation base plate, arrange the relative size positions of 8 bolts of 10×60, and pre-embed the bolts in the cement. Then fasten the mounting plate to it. Or punch holes directly in the concrete wall and fix it with expansion screws.
After the mortar is sufficiently fixed, fix the washer nuts of the mounting plate on the bolts. 8 bolts to a concrete wall or door frame.
The mounting angle of the body must be inserted into the mounting hole on the mounting plate.
1. Open the rear mounting plate screws of the air curtain, and take out the mounting plate;
2. Nail the mounting plate firmly on the installation position;
3. Hang the air curtain upside down on the fixed hanging board with the air outlet facing down;
4. Use the removed screws to align and re-tighten them.
Here are a few easy tips to remember when installing your air curtain.
Mount the air curtain ½ to 2 inches above the doorway (if possible). The closer the air curtain is to the doorway, the more effective it will be.
Mount curtains close together. If you are installing multiple air curtains over a single doorway, make sure that they are as close to one another as possible. Creating a uniform stream of air will lead to the best long-term performance and energy savings.
Take it slow. There is no rush when it comes to installing an air curtain. An improperly installed air curtain will result in problems for both you and your customers.
Get the sizing right. If you notice that there is some space over the area where you are placing your air curtain, remeasure and make sure that the entire opening is covered. Your air curtain will not be fully optimized if the curtain is not wider than the doorway. Air curtains can be stacked to fit any doorway.
Do not install the curtain on the inside of a freezer. Installing an air curtain on the inside of a freezer may seem like a small detail, but this will stop the curtain from functioning as the motor and fans will freeze before they can function properly.
Post time: Sep-14-2022